Can't examine high-cycle data flash on STM32H573

[dliebler]

I finally got to testing this.
Regarding the memory calculations:
The sector allocation for less than 8 high cycle seems to be fine.
But it is still a bit more complicated. 2M/1M Devices behave a little bit different to the 512k/256k Devices.
I have made a list of all the h5 devices here:
                        Start Flash1  Start Flash2  Sector F1   Sector F2   HC Sector1  HC Sector2
H503 : 128kB Flash      0x0800 0000   0x0801 0000   <------- NO HIGH CYCLE FLASH SUPPORT ------->
H523 : 256kB Flash      0x0800 0000   0x0802 0000   0-15        2000-2015   24-31       2024-2031
H523 : 512kB Flash      0x0800 0000   0x0804 0000   0-31        2000-2031   24-31       2024-2031
H533 : 512kB Flash      0x0800 0000   0x0804 0000   0-31        2000-2031   24-31       2024-2031
H562 : 1024kB Flash     0x0800 0000   0x0808 0000   0-63        2000-2063   120-127     2120-2127
H562 : 2048kB Flash     0x0800 0000   0x0810 0000   0-127       2000-2127   120-127     2120-2127
H563 : 1024kB Flash     0x0800 0000   0x0808 0000   0-63        2000-2063   120-127     2120-2127
H563 : 2048kB Flash     0x0800 0000   0x0810 0000   0-127       2000-2127   120-127     2120-2127
H573 : 2048kB Flash     0x0800 0000   0x0810 0000   0-127       2000-2127   120-127     2120-2127

You can also find this information in RM0481 7.3.10 on page 262-263.

I have attached a modified script which takes this into account as well.
With this, I tested it with the H563(2M) and the test project from earlier. It worked for both tests. Thats great!

I also tried to test it with a H533(512k), but the script crashes in line 83: 

Code:

_n_throw(intrfApi.readMem32(0x08fff80c))

I don't understand why this happens. With STM32cube programmer, I can read this address(flash size) and it is correctly reported as 0x00000200.
The H533 has a STLink V3J13M4 (should be latest)
But at the same time, I also didn't find any information about _n_throw() and intrfApi.readMem32(), so maybe one of them has other side-effects. Do you have an idea what could cause this?

And another thing, the H503 doesn't support HC at all, i think this also has to be addressed. do you want to split the script file into different scripts for H50x and H5xx or handle it all in one script?